| Specification |
| Parameters |
Specification |
Parameter |
Specification |
| Type Of Drum |
Tripple Seamed , Side Welded Narrow Mouth Two Bubgs Drum |
Internal Height Of Drum |
|
| Material Of Construction |
Galvanised Ms Sheet |
Outer Height Of Drum |
|
| Method Of Galvanisation Of Ms Sheet |
Hot Dipping |
Od At Top |
|
| Thickness Of Galvanised Layer(in Micron) |
Pre-galvanized Arnd 7-10 Microns |
Od At Middle |
571±1mm |
| Grade Of Steel |
Gp Sheets |
Od At Bottom |
|
| Thickness Ofsteel In Shell |
0.8 / 1.0 / 1.2 |
No. Of Flange & Bungs |
Two |
| Thickness Of Steel At Top |
0.8 / 1.0 / 1.2 /1.6 |
Id Of Flange – (2inch) |
2” |
| Thickness Of Steelat Bottom |
0.8 / 1.0 / 1.2 /1.6 |
Wt. Of Bung I |
64±3gm |
| Grade / Material Of Seaming Compound |
As Required |
Id Of Flange- Ii(3/4inch) |
¾” |
| Colour Of Drum |
N/a |
Wt. Of Bung Ii |
As Per Gp Sheet Thickness |
| Scratch Hardness Of Galvanised Layer |
|
Distance Between Two Bungs |
435±1mm |
| Gloss Level Of Galvanised Layer |
Good |
Tare Wt. Of Drum |
16 / 18 / 19.5 / 21.5 / 24 / 28 |
| Gloss Retention Of Galvanised Layer |
Good |
Over Flow Capacity Of Drum |
216lit |
| Type Of Corrugation At Top And Bottom Section Of Shell, If Any |
Usual / Multiple |
Leakage Test |
0.5kg/m2 Air Pressure |
| No. Of Rolling Hoops |
Two |
Drop Test |
As Per Iip Or Bis |
| Height Of Rolling Hoops |
585±2mm Out To Out |
Depth At Top Head |
17±1mm |
| Distance Betweentwo Rolling Hoops |
279±5mm |
Depth At Bottom Head |
17±1mm |
