Composite Barrels

50 Ltr

Specifications
Sr. No	Parameters	Specification	Parameter	Specification
1	Type of drum	Triple seamed, side Welded narrow Mouth two bubgs Drum	Internal height of drum	465±2mm
2	Material of Construction	Crca ms sheet & Hmhdpe	Outer height of Drum	509±2mm
3	Method of liner Manufacturing	Blow moulding	Od at top	397±1mm
4	Grade of steel	Dsk / osk	Od at middle	395±1mm
5	Weight of liner (in Kgs)	1.0 / 3.0	Od at bottom	397±1mm
6	Thickness ofsteel In shell	0.8/1.0 / 1.2	No. of flange & Bungs	One
7	Thickness of steel at top	0.8/1.0 / 1.2 / 1.6	Id of flange-i (2inch)	2”
8	Thickness of steel at bottom	0.8/1.0 / 1.2 / 1.6	Wt. of bung i	30/35gm.
9	Thickness of Hmhdpe liner (in Mm)	1.0 / 3.0	Id of flange- ii (3/4inch)
10	Colour of the liner	Blue / white	Wt. of bung ii
11	Grade / material of seaming Compound	As required	Distance Between two Bungs
12	Our of drum	Synthetic Enamel / stoving Enamel / pu paint	Tare wt. of drum	As per customer requirement
13	Scratch hardness		Over flow Capacity of Drum
14	Type of Corrugation at top and bottom section of shell, if any	Usual / multiple	Leakage test	Hdpe liner tested 0.1kg air Pressure
15	No. of rolling hoops	2 as required	Drop test
16	Height of rolling Hoops	3mm±1mm	Depth at top Head	16±1mm
17	Distance between Two rolling	As required	Depth at bottom Head	16±1mm

Specifications
Sr.	Parameter
1	Thickness (Gauge) Body	20 G	18 G
	Top and Bottom	20 G	18 G
	Corrugation	Usual/multiple	Usual/multiple
2	Dimensions
	01.external Height	892Mm(+/-3Mm)	892Mm(+/-3Mm)
	02.internal Dia.	572Mm(+/-2Mm)	572Mm(+/-2Mm)
	03. Ext.dia. at Rolling Hoop	585Mm(+/-2Mm)	585Mm(+/-2Mm)
	04.dist.between Rolling Hoops	279 ± 5Mm	279 ± 5Mm
3	Closure	2″ & 2″	2″ & 2″
4	Weight of Barrel	21.0Kg(+/-0.5Kg)	25.0Kg(+/-0.5Kg)
5	Epoxy Coating	N.a.
	1)Type of Coating	N.a.	N.a.
	2)Colour	Gold	Gold
	3)Thickness of Coating	20 Micron	20 Micron
	4) Acetone Test	100 Rub	100 Rub
	5) Internal Finishing	Clean	Clean
	6) Finishing of Coating	Uniform	Uniform
6	Leakage Test at 0.5 Kg/ Cm² Air Pressure	100% Barrel To Be Tested & No Leakage	100% Barrel To Be Tested & No Leakage
7	Marking	Company Logo	Company Logo
8	Paint
	1) Shade	As Required by Client	As Required by Client
	2) Uniformity	Should Uniform	Should Uniform
	3) Roll Down	No Roll Down	No Roll Down
	4) Adhesive Tape(Cross Hatch) Test	Should Be Ok	Should Be Ok
9	Screen Printing	As Required by Client	As Required by Client
10	Packing Detail	Plastic Wrapper + Corrugated Sheet	Plastic Wrapper + Corrugated Sheet

Specifications
Sr. No	Parameters	Specification	Parameter	Specification
1	Type of Drum	Tripple Seamed, Side	Internal Height of Drum	858±2Mm
2	Material of Construction	Crca Ms Sheet & Hmhdpe	Outer Height of Drum	890±2Mm
3	Method of Liner Manufacturing	Blow Moulding	Od at Top	586Mm
4	Grade of Steel	Dsk / Osk	Od at Middle	572Mm
5	Weight of Liner (In Kgs)	3.5 / 8.0	Od at Bottom	586Mm
6	Thickness of Steel In Shell	1.0 / 1.2	No. of Flange & Bungs	2 Nos
7	Thickness of Steel at Top	1.0 / 1.2 / 1.6	Id of Flange – I (2Inch)
8	Thickness of Steel at Bottom	1.0 / 1.2 / 1.6	Wt. of Bung I	30/35 Gm.
9	Thickness of Hmhdpe Liner (In Mm)	1.3 / 3.0	Id of Flange- Ii (3/4Inch)
9	Colour of The Liner	Blue / White	Wt. of Bung Ii
10	Grade / Material of Seaming Compound	As Required	Distance Between Two Bungs	40Mm
11	Colour of Drum	Synthetic Enamel / Stoving Enamel / Pu Paint	Tare Wt. of Drum	Depend Upon Liner Thickness & Crca Sheet
11	Scratch Hardness		Over Flow Capacity of Drum
12	Type of Corrugation at Top and Bottom Section of Shell, If Any	Usual / Multiple	Leakage Test	Liner Tested at .01Kg/m2 Air Pressure
13	No. of Rolling Hoops	2 / Multiple As Require	Drop Test	1.2
14	Height of Rolling Hoops	585±2Mm Out To Out	Depth at Top Head	17±1Mm
15	Distance Between Two Rolling Hoops	279±5Mm	Depth at Bottom Head	17±1Mm